Bricked_XE-Kernel-AOSP v1.6
ENJOY!
Default clocks: 1536Mhz max / 192Mhz min
OverClockable till 1914Mhz !NOT ALL DEVICES CAN HANDLE THIS!
GPU Overclock @ 300Mhz (maximum on most devices)
L2 Performance Boost only @ 1536Mhz (original by faux123)
(for stability reasons)
Features:
Code:
* FIXED 3D GAMING / CALLING!
* 2.6.35.14
* based on CM7 Kernel
* Too many ARM optimizations to count ;)
* Built with highest Optimization Level (O3)
* Strongly improved UI-performance (Quote: "Smoother than butter")
* Increased 3D-Performance
* Reduced power usage, 5 stages GPU scaling!
* CIFS
* UTF8 encoding (included for CIFS)
* wifi pm=fast
* Tweaked ondemand governor (reacts a lot faster)
* Undervoltage
* Overclocking to 1536Mhz default (max. 1914Mhz)
* Min Clock @ 192Mhz default
* Synchronous Multicore Threading
* Boot time optimization. CPU will have max clocks during boot to ensure a fast bootup
* Blazing fast with InsertCoin
* added smartassv2 as optional governor
* tweaked smartassv2 to fit pyramid OC clocks
* 2D-Performance Boost
* Flashlight and Camera-Flash will now be useable until battery reaches 15%
* Tree-based preemptible RCU
* Fast scheduler for CPU hotplug
* improved 3D performance
* optimized preemptive settings
* basic NTFS support
* Userspace driven configuration filesystem
* Allow CPU-supported unaligned accesses (faster than doing it by software)
* sysfs interface for mfreq
* Scaling_Available_Frequencies in cpufreq sysfs interface
* Global CPU Voltage table used for adjusting voltage table for SnapDragon Dual Core. Inspired by Snq- modified by faux123 for SnapDragon fixed by show-p1984
* Up2date Wifi driver
* Improved Mobile Connection (fixed possible freezes introduced by HTC)
* Updated USB driver
* Let MMFPB drop to 27MHz when processor power-collapsed (by Matt Wagantall)
* hotplug notifications for CPU, L2, bus, voltage (by Matt Wagantall)
* ~8% Undervolted till 1536Mhz
* Increased Voltage for higher clocks to run stable @ 1536Mhz++
* L2 Performance Push @ 1536Mhz (Original by faux123)
* Adreno220 OC mode @ 300Mhz when max scaled (Scaling is still automatic)
* Overclock till 1914Mhz possible. ALL FREQUENCIES ABOVE 1782Mhz ARE CONSIDERED UNSTABLE!
--(I don't want to increase Voltage any further, this will increase the risk of burning your cpu. So if it is unstable, choose a lower clock!)
* Let cpu1 jump in faster. (shouldn't affect battery but decreases lag some users were experiencing)
* Tweaked ondemand to raise frequencies with higher load only (should contribute to battery life)
* removed redundant code, has led to slower performance
* Create private workqueue for cpu frequency changes, speeds up things
* Increased writing performance (lowers that annoying lag when updating 2 apps at the same time)
* added 1080p playback optimization
* Increased GPU memory
* increased overall L2 frequencies, were bottlenecking
* included call rec support, yeah that's right, you can record calls now!
* Improved WIFI - WLAN detection
Changelog:
Code:
***** v1.6 *****
/* Help me! */
Detailed changelog follows... Too tired now :P
All changes up until Sense 1.6b4 present.
***** v1.4 *****
/* I'm different! */
Simple:
* Drastically increased UI performance (higher oc)
* Drastically increased battery life (introducing better graphics scaling)
* increased responsiveness
* increased native write speed
* Smaller kernel size (better compression)
* the usual amount of tweaks and fixes
* this fixes the small keyboard size as seen in v1.4test
Technically:
msm: overlay: Reverted the last update. This was causing the keyboard to "shrunk"
msm: kgsl: 8Stages 3D scaling, highest @ 300Mhz (fraction 33)
msm: kgsl: 6stages 2D scaling, highest @ 266,7Mhz, 33,35% Overclocked (fraction 100)
msm: kgsl: GPU off while screen off!
msm: kgsl: improved KGSL suspend
smp: improved CPU hotplug
cpufreq: max OC risen up to 1914Mhz
cpufreq: cleaned ACPU table
mm: adjust vm ratios increase swappiness by 50% decrease dirty_ratio by 50%
mm: increase readahead buffer
msm: scm: Cleanup interruption handling
msm: scm: Mark inline asm as volatile
msm: scm: Fix incorrect cache invalidation
msm: scm: Fix incorrect cache invalidation part 2
msm: scm: Add atomic SCM APIs
arm: Ignore certain memory optimizations on MSM8x60
ARM: Factor out common code from cpu_proc_fin()
proc-v7.S : Fix MMU disabling in cpu_v7_reset
ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
ARM: 6380/1: Introduce __sync_icache_dcache() for VIPT caches
ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
ARM: Improve the L2 cache performance when PL310 is used
msm: kgsl: Use the correct virtual address for pmem regions
msm: kgsl: Delay 30ms to make sure GPU is ready during resume time
msm: kgsl: Update pwrlevel_change
msm: kgsl: Add sysfs attribute to turn GPU DCVS off/on
kernel: Add XZ compression (orig: mdeejay, fixed for O2)
decompress: removed deprecated error function
rcu: priority boosting for TINY_PREEMPT_RCU
hash: The new jhash implementation
ext2: speed up file creates by optimizing rec_len functions
ext3: speed up file creates by optimizing rec_len functions
ext3: Add batched discard support for ext3
dm io: remove BIO_RW_SYNCIO flag from kcopyd
dm kcopyd: delay unplugging
compile & compatibility fixes
***** v1.3r3 *****
Are you still there? Hibernating...
Changes from v1.3r2:
* Higher Wifi voltage (should fix MIUI service bugs)
* Cleaned ACPU table
* KGSL changes to improve suspend
* no reboots anymore afaik
***** v1.3r2 *****
The cake is a lie.
The cake is a lie.
The cake is a lie.
The cake is a lie.
* Cam Flash fixed
* KGSL Reboot fixed (reverted to 2.3.4 version)
* Camera image Denoise HW Filter cranked up
* USB Tethering fixed
***** v1.3 *****
Now these points of data make a beautiful line.
And we're out of beta.
We're releasing on time.
So I'm GLaD.
---
* version numbers will be the same on both kernels from now on (since most of the changes are identical)
* No alpha/beta anymore.
* Brightest, newest, shiniest 1.3. Even sense doesn't have that version yet :P
** merged with sense version, added latest tweaks and updates:
*** KGSL changes back-ported from 2.6.38
*** Mem management bumped to 2.6.38
*** WQ bumped to 2.6.38
*** BT bumped to 2.6.38
*** Wifi bumped to 2.6.38
*** Fixed AOSP WIFI & BT & HOTSPOT issues
***** v0.1 *****
*******************************
**ALPHA RELEASE - EXPECT PROBLEMS AROUND EVERY CORNER!
**This will wipe your /cache! You do not need to do it yourself!
*******************************
* Added all the goodies from Bricked v0.86
* unintentionally fixed Calling Oo xD
How to install?
Just flash from recovery.
Where to complain about errors/bugs?
Please use the Issuetracker for bugs/errors/feature wishes!
Issuetracker @ https://code.google.com/p/bricked/issues/entry
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
IRC Chat: Freenode IRC #bricked
Download:
No Guarantees! If it kills your grandmother or your device, I am NOT responsible! If you understand this:
(If you download, please hit Thanks below my post! Thank you!)
*AOSP v1.6* [ondemand, PREEMPTIBLE] Click me
Featured Downloads: Click Me
All Downloads: Click Me
Use System Tuner or SetCPU to overclock!
Code:
Donor List:
stevejau tinky1 ziggimon.x3 Sobat.x2 moskito-hd2 VisedMonk.x2 smint86.x2
deagleone.x3 alhuang69.x2 thebarsteward madmarinero Twister988 mwie baadnewz
auras76 vlad48.x2 dingolino.x2 ChimeyJimmey artymarty rawrfische.x2 neuralboy
-Punisher- Sym_Link omerkisoss mweulink nbicho tinker2000 viking37.x4
Joshndroid.x2 kevsteele jmcdonald58 V6-Maniac ziggy1001 LittleH79 reXXin
sirbilbo Sylaan V_Raptor.x2 Catpoule henhoy zeroprobe Smintz nicob
boardwak SpeedyCarv LKW-Hermes katdog75 masondoctorjt
Thank you very much!
Source:

